Series ME-H
Automatic electrical mesh filter.
Filtering Element : 130 micron mesh
Ask for Other grades
General features
Energy Efficiency: Low water and energy consumption during the wash cycle.
Wide range: From 3″ to 14″
Easy maintenance: Hinged lid with convenient opening and easy access to the mesh.
Time saving: The filtration process continues simultaneously with the wash cycle.
Easy installation: Filters are delivered ready for installation.
Construction materials: High-quality for greater durability.
Suction nozzles: Designed for more effective suction.
Scanner: Designed for greater durability of the rotating sleeves.
Technical sheet
SYSTEM
Filtration produced by the retention of larger particles within the mesh gap. Large filtering surface and minimal pressure loss.
CONSTRUCTION MATERIALS
- Body: Carbon steel.
- Mesh: AISI 316 stainless steel.
- Mesh support: Injected polypropylene.
- Scanner: AISI 304 stainless steel.
- Suction nozzles: PVC.
- Piston: High-density polyethylene sleeve.
- Shaft: AISI 304 stainless steel.
- Seals: 60° Shore nitrile synthetic rubber.
- Screws: Zinc-plated.
SURFACE TREATMENT OF STEEL
The carbon steel elements receive internal and external treatment with a 2.5-grade shot-peening of the surface, then are pretreated with phosphate before undergoing electrostatic painting with several layers of epoxy polyester powder paint.
FILTERING ELEMENT
Stainless steel mesh injected directly into the polyamide cartridge, with filtration rates between 80 and 1000 microns, for our filters with a filtration surface area of 4,495 to 21,815 cm².
CLEANING
In the electric system, the filter cartridge is cleaned automatically and electrically without interrupting the water supply, using a set of suction nozzles that sweep over the entire surface of the dirty mesh.
Technical specifications.
Dimensions and Weights
